11/24/2021»»Wednesday

Bootcamp El Capitan Windows 10

I have installed Windows 10 on a Late 2014 Mac Mini running OS X El Capitan 10.11.3.

  1. El Capitan Boot Camp Windows 10 Iso
  2. Mac Os El Capitan Bootcamp Windows 10
  3. Bootcamp El Capitan Windows 10 64-bit

Here is my experience. If u just upgrade the yosemite to el cap PB1, it should be fine. But if you create another partition and then install on newly created partition, you might loose option to boot into windows (bootcamp partition). Even if you try via refit (or something else) still says: no bootable device found after blinking white cursor. Boot Runner puts admins in control of startup on dual boot Macs. It is an essential tool for labs, classrooms, and enterprise environments. Boot Runner also provides a seamless experience to help students, customers, and end users choose the right desktop. Boot Runner’s scheduling feature ensures that multi-boot Macs are in a ready state when.

The machine is listed in the approved Macs for running Windows 10.

  1. On supported Macs running OS X El Capitan, Boot Camp comes with a modified interface that places the ISO image selector and partitioning on a single screen, allowing a user to easily select an ISO.
  2. Mention, that for MacOS versions prior to OS X El Capitan 10.11 you will need to create bootable Windows USB. Download Windows ISO file. Open Boot Camp Assistant (Go to Applications Utilities) Define the Windows partition size choose downloaded Windows ISO file. Format Windows partition and go through all Windows installation steps.

Windows 10 is attempting to install an Upgrade to version 1511, 10586.

The 'Preparing Update' window with scrolling status bar runs and eventually presents the following error message:

'Couldn't install Windows 10. This device isn't compatible in Windows 10. Contact the manufacturer for more info.

•Intel(R) Iris(TM) Graphics 5100 (Intel Corporation)'

I used the Intel Driver Update Utility - http://www.intel.com/content/www/us/en/support/detect.html and installed the latest driver the tool recommended, but the Windows 10 update continues to fail with the identical error message as above. I contacted Intel support and their reply was that I needed to talk to Apple for a solution. I'm also unable to run a HDMI second monitor on the Windows side of Bootcamp, that runs perfectly on the Mac side of Bootcamp. Obviously, I have graphic card issues, but I don't have the answers.

Mac mini (Late 2014), OS X El Capitan (10.11.3), Intel HD Graphics 5000 Iris 5100

Posted on Mar 9, 2016 2:38 PM

Installing Windows on a Mac should be a piece of cake with Bootcamp, but thatrarely is the case. In fact, I would personally say that Boot Camp Assistantis one of the worst apps that comes with OS X and unlike the rest, it doesn’twork seamlessly.

A few of its drawbacks:

  • It only supports a drive with a single partition.
  • It often throws very obscure error messages with limited detail.
  • It re-downloads 1.6 GB Windows drivers every single time it runs. These areplaced under /Library/Application Support/BootCamp/WindowsSupport.dmg anddeleted and re-downloaded each time Boot Camp Assistant starts processing.

This post did take a lot of work to complie and I did bone my hard drive afew times while trying certain ideas, so please throw out a thanks if ithelped you out :)

Disclaimer: This guide below contains procedures which can potentiallydestroy your partitions and data. I accept no responsibility for such loss soplease proceed at your own risk.

Update (2016-07-20): I have updated this post with further improvementsrelating to downloading of Boot Camp drivers and ensuring that a Hybrid MBR isnot used (which would cause issues when installing Windows).

What You Will Need

  • An 8 GB or larger USB stick
  • A copy of the Windows 10 ISO
  • A valid Windows 10 license
  • A downloaded copy of unetbootin

Downloading Boot Camp Drivers

  1. Start Boot Camp Assistant
  2. Select Action / Download Windows Support Software
  3. Choose your Downloads directory, enter your password and then clickSave

This will be the only step that we will use Boot Camp Assistant for.

Creating a Bootable USB Windows 10 Installer

Formatting Your USB Stick

Attach your USB stick and start Disk Utility, select your USB drive in theleft panel under External, click Erase and set the options as follows(exactly) and click Erase:

Name: FAT32
Format: MS-DOS (FAT)
Scheme: Master Boot Record

Turning Your USB Stick into a Windows Installer

Open unetbootin, enter your password, set the options as follows andclick OK:

Diskimage: checked, set to ISO and browse to your Windows 10 ISO
Type: USB Drive
Drive: Your USB drive (you should only see one entry here)

If you see more than one drive listed, you may confirm which is your USB driveby opening the Terminal and typing:

You’ll see your USB drive in the output and it should look something like this:

Once you have kicked off unetbootin, grab a snack while the Windows ISO iscopied to the USB stick. This process takes around 15 minutes to complete.

Finishing Up

When this has completed, you may right click on the USB stick in Finder,select Rename “FAT32” and rename it as you like (I’ll call mine“WINDOWS 10”).

Finally, copy the WindowsSupport in your Downloads directory tothe Windows 10 USB stick so it’s easy to get to after our installation.

Partitioning Your Drive

In Disk Utility, select your internal hard drive on the left panel, andclick on Partition.

Click the + button and create a new partition of your desired size for yourWindows installation and name it as you wish (I’ll call mine “BOOTCAMP”). Ensure that the Format is set to MS-DOS (FAT) and click on Apply.

Ensuring that a Hybrid MBR is not used

Huge thanks to Rod’s post from the superuser post titledWindows detects GPT disk as MBR in EFI boot.

Once you add a FAT32 partition with either Boot Camp Assistant or Disk Utility,your disk is converted into a hybrid GPT / MBR disk which is actually notsupported by newer versions of Windows. In this step, we revert thisadditional change made by Disk Utility by switching back to a pure GPTpartition table.

  1. Dowload the latest version ofGPT fdiskby browsing to the version, then gdisk-binaries and clicking the filewith the *.pkg extension (e.g. gdisk-1.0.1.pkg).

  2. Install GPT fdisk by running the installer you downloaded

  3. Open a Terminal and check the state of your MBR

    If your MBR partition is set to hybrid, please continue with step 4,otherwise if it is set to protective, you may skip the rest of thissection. Simply type q and hit return to exit GPT fdisk.

  4. Type p to view the existing partition table and verify you’re workingon the correct disk

  5. Type x to enter the expert menu

  6. Type n to create a fresh protective MBR

  7. Type w to save your changes and confirm the change when asked

  8. Type q to exit GPT fdisk

  9. Run GPT fdisk to show your disk layout:

    Your partition table should look something like this:

Installing Windows

Disconnecting All Devices From USB Ports

This step is critical as I have had rather serious problems during Windowsinstallation when certain external drives are connected.

Unplug everything from your Mac except your keyboard (if wired) and yourbootable Windows USB stick (which we prepared earlier).

If your Mac contains multiple physical drives, you will need to disconnectall disks except the one which you intend to install Windows on or you mayencounter the following error:

Windows could not prepare the computer to boot into the next phase of installation. To install Windows, restart the installation.

Booting From the USB Stick

Ensure that the USB stick containing the Windows installer is inserted andthen restart your Mac while holding down the option (alt) key.

You should now be presented with a list of bootable drives. Select the USBdrive (usually titled “EFI Boot”) to begin installing Windows.

Capitan

Correcting Your Windows Hard Disk Partition

When you are asked Where do you want to install Windows?, select theWindows partition created earlier (which I called “BOOTCAMP”) and clickDelete.

Next, select the chunk of Unallocated Space and click on New to createa proper Windows NTFS partition.

Note: OS X only supports creation of FAT filesystems, so this is why we needto re-create the partition ourselves during install.

Completing the Installation

Allow the installer to complete and boot into Windows.

Installing Boot Camp Support Software

Once Windows is up and running, install the Boot Camp Support software runningWindowsSupport/BootCamp/Setup.exe on your USB stick.

Note: The installer takes a little while to show up, so please be patient.

You may encounter a known issue whereby the Boot Camp Support Softwareinstaller locks up while installing Realtek audio.

If this occurs, you will need to open Task Manager and kill theRealtekSetup.exe process.

After the installer has completed, answer No when prompted to rebootand install the Realtek drivers manually by running%USERPROFILE%AppDataLocalTempRarSFX0BootCampDriversRealTekRealtekSetup.exe.If you can’t find this file, check any other directories starting withRARSFX under %USERPROFILE%AppDataLocalTemp.

Once complete, reboot Windows.

What You Will Need to Configure Windows

  • The latest version of SharpKeys
  • The flipflop-windows-sheel binary (see README for a download link)

Configuring Windows

Mapping Your Mac Keyboard

El Capitan Boot Camp Windows 10 Iso

Install and run SharpKeys and then configure the following mappings tocorrect your Mac keyboard so that it behaves like a regular Windows keyboard:

Function: F13 -> Special: PrtSc
Special: Left Alt => Special: Left Windows
Special: Left Windows => Special: Left Alt
Special: Right Alt => Special: Right Windows
Special: Right Windows => Special: Right Alt

Note: for F13, you’ll need to select Press a key and click F13 on yourkeyboard.

Switching to Natural Scrolling

If you wish to flip scrolling direction to match that on OS X, runFlipWheel.exe and then click on Flip All.

Enabling Num Lock on Boot

Paste the following into a file named Enable NumLock on Boot.reg thenimport this into the registry to enable NumLock when Windows boots up(it doesn’t by default).

Completing Configuration

Mac Os El Capitan Bootcamp Windows 10

That’s it, give your machine one last reboot and you’ll have a fully workingWindows 10 installation.

Bootcamp El Capitan Windows 10 64-bit

Note: I have found Apple’s Magic Mouse to be extremely unreliable usingthe Boot Camp drivers from Apple. As such, I recommend purchasing a Logitech(or similar) mouse for use in Windows. I have no trouble plugging thewireless receiver for my Logitech mouse into one of the USB ports of my wiredApple Keyboard and it’s so tiny that you can’t see it at all.

Cleaning up a Windows Installation

Removing the Windows Partitions

If you decide to remove Windows, you may find that Disk Utility doesn’t allowyou to delete the two partitions that have been created by the Windowsinstaller.

This happens due to the fact that the first small partition created is of atype called Microsoft Reserved which OS X’s Disk Utility doesn’t support.

Bootcamp

The safest way to delete these partitions is through the Windows installer. Sosimply boot from your USB stick as we did before and when you reach theWhere do you want to install Windows? question, you may delete your“BOOTCAMP” partition and the small 16 MB partition of type MSR (Reserved)just above the BOOTCAMP partition.

Once done, simply quit the installer by clicking the X in the top right cornerof each Window and reboot back into OS X.

Removing the Boot Entry

Even though we have removed the Windows partition, a boot entry will still bepresent when holding down option (alt) during boot.

You may remove these items by running the following in your Terminal:

Most Viewed Posts